The Ricoh Auto 8p Trioscope Zip: A Vintage Dual 8mm Projector
If you are a fan of old movies and have a collection of standard 8mm or super 8mm films, you might be interested in the Ricoh Auto 8p Trioscope Zip, a vintage dual 8mm projector that was marketed in 1970 by the Japanese company Ricoh[^1^]. This projector can automatically switch between the two film formats by a lever, and has a zoom lens with a maximum aperture of f/1.3. It also has a built-in film cutter, a variable speed control, and a magnetic motor. The projector can handle reels up to 120 meters in length, and has a projection speed range of 14 to 21 frames per second. The projector uses a 50 watt, 8 volt CXR lamp, and can run on various voltages from 100 to 240 volts AC[^1^].
The Ricoh Auto 8p Trioscope Zip is a portable and compact projector that weighs about 5.6 kilograms and measures 164 x 184 x 311 millimeters. It has a sleek design with a silver and black color scheme, and a carrying handle on top. The projector has a forward, reverse, and still projection mode, and can project on a screen or on a wall. The projector has a sound output jack for connecting external speakers, but does not have a built-in sound system or amplifier[^1^].
The Ricoh Auto 8p Trioscope Zip is a rare and collectible projector that is not easy to find nowadays. It is praised by some film enthusiasts for its quality and versatility, but it may also have some drawbacks, such as the difficulty of finding replacement parts or bulbs, or the possibility of having rubber tires that have deteriorated over time[^2^]. If you are lucky enough to own one of these projectors, you can enjoy watching your old films with a nostalgic flair. However, you should also take good care of your projector and your films, as they are both precious relics of the past.
If you want to use the Ricoh Auto 8p Trioscope Zip projector, you need to follow some simple steps. First, you need to plug the projector into a power outlet and turn on the power switch. Then, you need to select the film format you want to use by moving the lever on the back of the projector. Next, you need to load the film reel onto the upper spindle and thread the film through the projector. You can use the automatic threading feature by pressing the threading button, or you can manually thread the film by following the arrows on the projector. After threading the film, you need to attach the end of the film to an empty reel on the lower spindle. You can adjust the focus and zoom of the lens by turning the knobs on the front of the projector. You can also adjust the projection speed by turning the rheostat knob on the side of the projector. To start projecting, you need to press the run button on the top of the projector. You can stop projecting by pressing the stop button, or you can pause projecting by pressing the still button. To rewind or reverse projecting, you need to press the reverse button. To cut off a section of film, you can use the built-in film cutter by pressing it down on the film. To remove the film from the projector, you need to unthread it and take off the reels from the spindles.
Using the Ricoh Auto 8p Trioscope Zip projector can be a fun and rewarding experience, but you also need to be careful and gentle with your projector and your films. You should not expose your projector or your films to direct sunlight, heat, moisture, dust, or dirt. You should also clean your projector and your films regularly with a soft cloth or a brush. You should store your projector and your films in a cool, dry, and dark place. You should also check your projector and your films for any signs of damage or wear before using them. If you encounter any problems with your projector or your films, you should consult a professional repair service or a knowledgeable collector. 061ffe29dd